SECTION
XI
99
SECTION XI
DOWNLOADING
WHAT IS
DOWNLOADING?
WHAT IS NEEDED TO
DOWNLOAD?
HOW DOES DOWN-
LOADING WORK?
Downloading allows the installer or central station operator to remotely
access. program, and control the security system over normal telephone
lines. Anything that can be done directly from the keypad can be done
remotely, using DOWNLOADING.
1.
2.
3.
4.
An IBM PC, or wmpatibie computer.
MS DOS 3.1 or higher, in order to run th8 DOWNLOADING program. MS
DOS stands for: MicroSoft Disk Operating System.
A HAYES 1200 SMARTMODEM (external: level 1.2 or higher; internal:
level 1.1 or higher). tf these levels cannot be found locally, an external
modem can be purchased from ADEMCO, or contact HAYES for a free
update. Other brands are not compatible. even it claimed to be 100%
compatrible.
4130PC DOWNLOADING software, from ADEMCO. This software is
available in both 3-112’ (413OP3-3) and 5114” diskettes, and includes a
complete User’s Manual.
At the protected premises, the VISTA XM Control panel must be connected
to the existing telephone line via the 417lXT-XM dialer board (refer to the
PHONE LINE CONNECTIONS section).
Assuming a new installation, the installer must do 3 things:
(1) Enter the programming mode and load the factory defaults by
pressing ‘97. This loads specific information needed to complete a
successful first wmmunication.
(2) Program a phone number to which the computer and modem are
attached (‘35). This number is known as the “CALL-BACK NUMBER”.
(3) Program the number of rings at which the VISTA XM is to ‘answer
f44). Thii k known as the ‘RING COUP.
The panel k now ready for its first wmmunicatiin.
In order to remotely access. wntroi, or program the alarm panel, a ‘link’ must
be established between the computer and the wntroi panel, as follows:
1. The computer calls up the Control panel. (The phone number for each
customer k entered Into the wstomefs account file on the computer).
2. The Control panel ‘answers- at the pre-programmed ring count and
executes a handshake with the computer.
3. The computer sends a requebt for call-back to the Control panel.
4. The panel acknowledges the request and hangs up. During the next few
seconds, the Control panel will process the request making sure certain
encrypted information, received from the computer, matches its own
memory.
5. Upon a succes6fui match, the Control panel will seize the phone line and
call the computer back.
6. The computer answer6, usually by the second ring, and executes a
handshake with the panel.
7. The panel then send6 other default information to the computer. if this
information matches the computeh information, a successful link ‘a
established. Thii is known as being *ON-LINE”.
ADEMCO’s VISTA X&f SERIES TECHNICAL RRFERENCE
MANUAL
WWW.DIYALARMFORUM.COM
(8 Seiten)
(173 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern