ADEMCO 5130XM Bedienerhandbuch PDF herunterladen (Seite 32)

SYSTEM CONFIGURATION (ZONES)

.--.

ADVISORIES

1. Do

not

place transmitters on or near metal objects. This will decrease

range ancVor block transmissions.

2. Place the 4280 in a high, centrally located area for best reception. Do not

place receiver on or near metal objects.

3. The 4280 receiver nust be at least 10 feet from the Control panel or any

remote consoles to avoid interference from their microprocessor.

4. When connecting a door/window contact to a 5711, 5711WM. or 5715

transmitter, avoid a wire length of 20-24 inches. This particular length

decreases range. A shorter or longer length has no effect.

WIRELESS

ZONE TYPES

Each RF zone can be programmed to respond as any zone type such as

ENTRY/EXIT, INTERIOR, PERIMETER, etc. (see the section under ZONE

TYPES for a complete explanation of each zone type). Desired alarm

responses can be broken down as follows:

ZONf NPF

JRANSMTTTFRS Wf

Entry/Exit Burg

i through 63

Perimeter Burg

1 through 63

Interior Burg 1 through 63

32 through 47

(5775)

Are

1 through 63 ‘(5715)

48 through 55

* (5706)

24 Hour Panic (silent or audible)

Day/Night Burglary

24 Hour Auxiliary

NOTES:

. .

1 through 63’

62 or 63 “** (5701)

1 through 63

. . .

Transmitters set for an ID of 32 through 47 will have a 3 minute bck-

out between transmissions.

Transmitter ID’s 48 through 55 have highest signal priority.

Transmitter ID’s 62 and 63 are unsupervised to allow removal of the

5701 otf premises - signal priority is lower than that of fire, but higher

than burglary.

.-..

ADEMCO’s VISTA

SERIES TECHNICAL REFERENCE MANUAL

WWW.DIYALARMFORUM.COM

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 158 159

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO 5130XM Bedienerhandbuch Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO 5130XM