
46
SYSTEbf CONFIGURATXON (PERIPHERALS)
n
4171 XT-XMI4171 XM
TERMINAL
DESIGNATIONS
Terminal 1.
This is a programmable outm (See 1’46). it can be used as a
ground start output with the 675 Ground Start Module, as an
output to produce console audible warnings on a remote
sounder (ex: No. 70612), or as an open/close trigger for use
wfth other communications media.
NOTES:
l
The 675
is not UL listed.
l
Only one of the above options can be chosen.
l
ff either GROUND START, or CONSOLE AUDIBLE is
chosen, Auxiliary Voltage Trigger pin 4 may not be used.
Terminal 2.
INCOMING PHONE LINE (Tip)
Terminal 3.
INCOWlING PHONE LINE (RING).
Terminal 4.
LOCAL HANDSETS (RING).
Terminal 5.
LOCAL HANDSETS (TIP).
Connect the green flying lead to a proper earth ground.
WARNING:
To prevent the risk of shock, disconnect phone lines at telco
jack before servicing the unit.
INCOMING “TIP”
INCOMING TELCO LINES
1:’ , , , , ,-..--., , -,
T ,
z
0
-
USE RJ31X
FCORD NO.
A MO-366.
/
lOl@l@lO
\ \ / / i
w -
LOCAL PHONES
PHONE LINE
CONNECTOR BLOCK
BLACK
6 (-) AUX POWER (TB2-13 OR RED/BL
‘~‘~*ORANGE JUMPER
MUST
BE CUT!
Diagram 26. PHONE LINE AND GROUND START CONNECTIONS
.ACK)
ADEbfCO’s VISTA XM SERIES TECHNICAL REFERENCE MANUAL
WWW.DIYALARMFORUM.COM
Kommentare zu diesen Handbüchern