ADEMCO 4140XMPT2 Bedienungsanleitung PDF herunterladen (Seite 96)

– 96 –

Bypass commands

NOTE: Activation times 1 (Begin), 2 (End), 3 (During) are the only valid

choices for these commands. Note the following if 3-During activation time is

selected: Auto bypass will bypass the zone(s) at the beginning of the window

and unbypass the zone(s) at the end of the window. Auto unbypass will

remove the bypass of the zone(s) at the beginning of the window and will

restore the bypass of the zone(s) at the end of the window.

Action Code Action Specifier

30 Auto bypass - Zone list Zone list #

31 Auto unbypass - Zone list Zone list #

Open/close / Access

NOTE: Activation time 3 (During) is the only valid choice for these commands.

Action Code Action Specifier

40 Enable Opening Window by partition Partition(s)

41 Enable Closing Window by partition Partition(s)

42 Enable Access Window for Access group(s) Group(s)

3 ) Enter the desired Activation time, which refers to when the action is to

take place relative to the time window. Select from:

Activation

Time Description

1 Beginning of time window

2 End of time window

3 During time window active period only (On at beginning of

window, off at end).This can be used in conjunction with the

arm, disarm or bypass commands to control a part of the system

during the window. For example, if bypass is selected to

activate during the window, the zones in the zone list will be

bypassed at the beginning of the window and unbypassed at

the end of the window.

4 Beginning and end of time window (ex. -Coffee break buzzer).

In this example, if relay pulse was selected, the relay would

pulse for 2 seconds at the beginning of the window, signaling

the beginning of the coffee break. At the end of the window it

would pulse again, signaling the end of coffee break.

Time Driven Events Worksheet

Sched. Time Day(s) Action Action Activation

Num. Window M T W T F S S H Desired Specifier Time

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 131 132

Keine Kommentare

ADEMCO 4140XMPT2 Bedienungsanleitung Seite 96