ADEMCO 4140XMPT2 Bedienungsanleitung PDF herunterladen (Seite 58)

– 58 –

Dialer Options

(continued)

* 5 2 Standard/Expanded Report Primary

Enter 0 for standard or 1 for expanded reporting for the primary phone line.

Note: Expanded overrides 4+2 format.

*53 Standard/Expanded Report Secondary

Enter 0 for standard or 1 for expanded reporting for the secondary phone

line. Note: Expanded overrides 4+2 format.

*54-*78 Report Codes For Zones 1-64 & 81-87

Enter the appropriate report codes for each zone used in the system.

* 7 9 Zone Type Restores For Zone Types 1-8

Enter 1 to enable restore reporting for individual zone types. Enter 0 if no

restore report is desired for a zone type.

*80 Zone Type Restores For Types 9/10

Enter 1 to enable restore reporting for individual zone types. Enter 0 if no

restore report is desired for a zone type.

*81-*82 Non-Alarm Report Codes

Enter the appropriate report codes as indicated on the programming form.

* 8 9 Restore Report Timing

Enter 0 for instant restore report, as zone restores. Enter 1 for reporting

after bell timeout if zone restored. Enter 2 for restore report when system

is subsequently disarmed

2nd page fields

1*33 Touch-Tone W/Rotary Backup

Enter 1 to enable Rotary back-up dialing if communicator is not successful

on dialing using touch-tone DTMF on first attempt. Enter 0 if this option is

not be to be used.

1*34 Comm. Split Report Selection

This field allows certain reports to be directed to either the primary or

secondary phone number. Enter 0, 1, or 2, in accordance with the

following: 0 = split reporting disabled; 1 = alarm, alarm restore & cancel

reports sent to primary Telco number, all others to secondary Telco

number; 2 = open/close & test reports sent to secondary Telco number

and all other reports to primary. See *51 for split/dual reporting comments.

1*35-1*39 Report Codes For Zones 65-80

Enter the appropriate codes as shown on the programming form.

1*40-1*41 Event Logging Report Codes

Enter the appropriate code as shown on the programming form.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 131 132

Keine Kommentare

ADEMCO 4140XMPT2 Bedienungsanleitung Seite 58