ADEMCO 4140XMPT2 Bedienungsanleitung PDF herunterladen (Seite 103)

– 103 –

Programming Temporary

Schedules

Temporary schedules override normal schedules.

Enter user code + # + 81 to enter this mode. Note that only users with authority

level of manager or higher can program temporary schedules.

Temporary schedules only affect the partition from which it is entered.

Temporary schedules can also be reused at later dates simply by scrolling (by

pressing #) to the DAYS? prompt (described below) and activating the

appropriate days. This should be considered when defining daily time windows.

Mon DISARM WIND.

00:00AM 00:00AM

This prompt asks for the start and end time of disarm

(opening) window. Upon entry of this mode, the

cursor will be positioned on the tens of hours digit of

the start time for Monday's disarm window. Enter the

desired hour. Press * to move to the minutes field.

The minutes are entered in the same manner. The

AM/PM indication is toggled by hitting any key in the

0-9 range while the cursor is under the letter A/P

position. Repeat for the stop time entry. Press the *

key to move to the arming window for Monday.

Press # if no changes are desired.

Mon ARM WINDOW

00:00AM 00:00AM

This prompt asks for the start and end time of arm

(closing) window. The cursor will be positioned on

the tens of hours digit of the start time for the arm

window. Enter the desired hour. Press * to move to

the minutes field. The minutes are entered in the

same manner. The AM/PM indication is toggled by

hitting any key in the 0-9 range while the cursor is

under the letter A/P position. Repeat for the stop

time entry.

After the windows for that day have been completed,

the system will prompt for disarm and arm time

windows for the next day.

Press # if no changes are desired.

Tue DISARM WIND.

00:00AM 00:00AM

Repeat the procedure described above for all days

of the week.

When all of the days have been completed, the

system will ask which days are to be activated.

Days ? MTWTFSS

Hit 0-7 x x

This is the prompt that actually activates the

temporary schedule, and allows the temporary

schedule to be customized to a particular week's

needs. To select the days which are to be activated,

enter 1-7 (Monday = 1). An "X" will appear under that

day, indicating the schedule for that day is active.

Entering a day's number again will deactivate that

day. Pressing 0 will toggle all days on/off.

The temporary schedule will only be in effect for the

days which have the letter x underneath them. As

the week progresses, the selected days are reset to

the deactive state.

When completed, press * or # to exit the temporary

schedule entry mode.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 131 132

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO 4140XMPT2 Bedienungsanleitung Seite 103

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO 4140XMPT2