ADEMCO 4140XMPT2 Bedienungsanleitung PDF herunterladen (Seite 66)

– 66 –

Serial Number

Learning/Deleting

SERIAL # PROG?

0=no 1=yes

To learn or delete a device's serial number, enter 1

(yes). Enter 0 to move to the Device

Programming menu.

Enter zone no.

00=QUIT

Enter the zone number of the device to be learned

or deleted. Press * to move to the next prompt.

Enter 00 to quit Serial Number programming.

If the device for that zone number was not

programmed as a serial number input device in the

Zone Programming menus, a prompt indicating

such will appear. Press * to return to the Enter Zone

No. prompt.

10 PROG AS RF:2

A000-5372:2

If a serial number has already been learned for that

device, a summary prompt will appear displaying the

type of device and its serial number. Press * to

continue to the Delete S/N prompt.

DELETE S/N?

0=No, 1=Yes

Enter 1 to delete the displayed serial numbered

device. Enter 0 if this device should not be deleted.

Input type

Input = 0 or 3-6

If a serial number for that device has not been

learned yet, and if the device assigned to that zone

number has been programmed as a serial number

input device in the Zone Programming menus,

this prompt will appear. Enter the device input type

as follows: 0=none, 3= supervised RF transmitter, 4=

unsupervised RF transmitter, 5= RF button type, 6=

serial polling loop device. Press * to move to the next

prompt.

Learn S/N?

0=No, 1=Yes

If adding a new serial number device to the system,

this prompt will appear after entering the input type..

Enter 1 to have the system learn the device's serial

number. To learn the serial number at a later time but

retain the zone programming information, enter 0. If

0 is entered, a zone summary screen appears

(described later). Press * to return to the Enter Zone

No. prompt to learn another device's serial number or

to exit learn menus.

Input S/N:L

Axxxxxx -xxxxxxxx:L

If 1 was entered at the Learn S/N? prompt, this

screen will appear. The device's serial number can

be manually entered, or it can be automatically

learned by faulting the device at least twice (causing

2 transmissions). Two transmissions must be

received. The console will beep with each

transmission received. Press * to continue.

10 PROG AS RF:2

A000-5372:2

A summary screen will appear if the serial number

was successfully learned. Press * to continue.

XX ZT P RC IN:L

A summary screen for the zone programming will

appear showing the zone number, zone type (ZT),

partition assignment (P), report code (RC), and input

device type (IN:L). Press * to continue. The Enter

Zone No. prompt will appear again.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 131 132

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO 4140XMPT2 Bedienungsanleitung Seite 66

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO 4140XMPT2