ADEMCO Security System VISTA-15CN Einstellungsanleitung PDF herunterladen (Seite 71)

Section 15 - Data Field Descriptions

15–9

✱

66 ARM AWAY/STAY REPORT CODE 0 | 0

AWAY/STAY

This option allows for independent programming of AWAY and STAY reports.

Second digit of report is user number if Expanded or 4+2 reporting is selected.

NOTE: Open reports are not sent if the associated Closing report is not

enabled. Arming the system in MAXIMUM mode generates an Away report;

arming the system in the INSTANT or NIGHT-STAY mode generates a Stay

report.

✱

67 RF XMTR LO BAT REPORT CODE

(See box on page 15-7)

0 | 0

This is sent in the event that a wireless transmitter low-battery condition

exists.

✱

68 CANCEL REPORT CODE (

See box on page 15-7

) 0 | 0

This is sent upon disarming of the system after an alarm condition is

reported.

RESTORE

REPORT CODES

(

✱70–✱76)

✱70 ALARM RESTORE REPORT CODE (

1st digit)

This is sent when the zone that caused an alarm is restored to its non-faulted

condition. The second digit is automatically sent as the second digit of the

zone Alarm Report code programmed in field

✱

56 or

✱

58, if Expanded or 4+2

reporting is selected.

✱

71 TROUBLE RESTORE REPORT CODE 0 | 0

See box on page 15-7

. This is sent when a trouble in a zone is restored.

✱

72 BYPASS RESTORE REPORT CODE 0 | 0

See box on page 15-7

. This is sent when a zone that has been bypassed is

unbypassed.

✱

73 AC RESTORE REPORT CODE 0 | 0

This is sent when AC power has been restored after an AC power outage.

See

box on page 15-7.

Reports with subscriber number.

✱

74 LOW BAT RESTORE REPORT CODE 0 | 0

This is sent when a system low-battery condition is restored to normal.

See

box on page 15-7.

Reports with subscriber number.

✱

75 RF XMTR LOW BATTERY RESTORE CODE 0 | 0

See box on page 15-7.

This is sent when a transmitter that previously sent in

a Low Battery message has sent a message indicating it no longer has a low-

battery condition.

✱

76 TEST RESTORE REPORT CODE 0 | 0

This is sent when the Test mode is exited.

See box on page 15-7.

Reports with

subscriber number. A restore code entered here causes a Restore message to

be sent when Test mode is exited.

DAYLIGHT SAVING

TIME

(

✱

78)

✱

77 DAYLIGHT SAVING TIME START/END MONTH 4 | 10

0 = Disabled

1 = Jan, 2 = Feb, 3 = Mar, 4 = April…10 = Oct, 11 = Nov, 12 = Dec

(Enter 0 - 9; # + 10 for Oct; # + 11 for Nov; # + 12 for Dec.)

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 131 132

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO Security System VISTA-15CN Einstellungsanleitung Seite 71

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Security System VISTA-15CN