
6–1
SECTION 6
Wireless Expansion
(5800 System)
••••••••••••••••••••••••••••••••••••••••••••••••••
In This Section
♦
About Wireless Expansion
♦
Installing the 5881/5882 Receiver
♦
Installing the 5800TM Module
♦
About Jam Detection and Reporting
♦
5800 Series Transmitters
♦
Installing 5800 Series Transmitters
••••••••••••••••••••••••••••••••••••••••••••••••••
About Wireless Expansion
In
addition
to its basic wired zones, the VISTA-15/VISTA-15CN control supports up to 26
wireless zones
using an appropriate 5881 (5882 in Canada) type RF receiver. The actual
number of zones supported depends on whether you are using a wired zone expander module.
For example
: If
you are using only four of the wired expansion loops, a
5881H (5882H in
Canada)
RF receiver could add 22 RF zones to the system, using any unused zone numbers
10-35, for a combined total of 26 wired and wireless expansion zones.
The receiver can detect signals from
wireless transmitters
within a nominal range of 200
feet.
RF Receiver No. of Zones
5881L/5882L up to 8
5881M/5882M up to 16
5881H/5882H up to 26
Receiver Supervision
The receiver is supervised. The following conditions causes a Trouble report to be generated
and
CHECK
and
ZONE 09
messages to be displayed:
•
Communication between the panel and the receiver is interrupted.
or
•
No
valid
RF signals from at least one supervised wireless transmitter are received within
12 hours.
House Identification
If you are using a 5804BD, 5827, or 5827BD Wireless Keypad with the system, you must
program a House ID Code (01-31) in field
✱
24 to establish proper communication, and the
keypad must be set to the same ID.
House ID 00 disables all wireless keypads.
Kommentare zu diesen Handbüchern