ADEMCO Accord Installationshandbuch PDF herunterladen (Seite 52)

Group 0 Communications & RF

Group 0 — Option 1 Technistore Version

This option is for use with Technistore reset. The engineer can programme the

Technistore Version Number with a valid range of 000 to 255.

To programme the Technistore Version Number:

• Enter Programming Mode.

• Press 0, then 1, then enter the Technistore version number.

This option defaults to 000.

Note: The Technistore Version should be selected after discussion with the Alarm

Central Station (ARC).

Group 0 — Option 2 Confirmed Alarm Time Window

This option represents the necessary time period between the activation of two

separate zones before a confirmed alarm signal is sent to the ARC.

0. 45 mins

1. 10 mins

2. 20 mins

3. 30 mins

4. 60 mins

This option defaults to 4 (60 mins).

Group 0 — Option 3 Report Low Batt in Channel 9 or Contact ID

When enabled, this option signals a panel low batt condition as a code 8 in channel 9.

0. Disabled

1. Enabled

This option defaults to 0 (Disabled).

Group 0 — Option 4 RF Keyfob Set/Unset Options

This option assigns the operation of the keyfobs.

0. Set/Unset during entry

1. Set/Unset anytime

2. Disable Keyfobs

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 77 78

Keine Kommentare

ADEMCO Accord Installationshandbuch Seite 52