ADEMCO Accord Installationshandbuch PDF herunterladen (Seite 26)

Programming Fields

To programme a parameter select the programming group. Enter the second digit to

choose the zone number, zone option or system option to be modified. Enter the third

digit to programme the zone type, zone option or system option.

yeKemaN

1snoitpoteSlluF

2snoitpOteStraP

3snoitpoteSthgiN

41snoitpOmetsyS

52snoitpOmetsyS

61snoitpOsmmoC

72snoitpOsmmoC

8sreggirTsmmoC

93snoitpOmetsyS

03snoitpOmetsyS

1#senoZFR

2#tseTkaoS

6#snoitpOmrifnoC

Note: If the keypad beeps twice the

information has been correctly

entered. If the control panel beeps

three times after making a

programme entry, either the entry

was invalid or too much time was

taken to enter the information.

Table 3.1 Programming Groups

Viewing Field Programming

To view the programme options in groups 1, 2, #2, 3, 4, 5, #6, 7, and 9; enter Engineer

mode and enter the group number then 00. The value for each option will display in

sequence.

To view the single option programming for groups #1, 6, 8 and 0, enter engineer mode

followed by the group number, then 0 followed by the option number.

Example: To View the Primary telephone number:

1. If not in Engineer Mode, enter the engineer code.

2. Enter the group number 6, press 0, then the option number 1.

3. The LEDs on the keypad, light to display the programmed telephone number, (Icon

keypad displays telephone number as a sequence of digits).

Changing Engineer Code

The engineer code is user 0 on the system.

The engineer code can be changed by entering 9090, then 8 (CODE), then 0 (LOG)

then a new four digit code; for example:

9090 8 0 5678

Engineer Code is now 5678

Two beeps confirm the code has been accepted.

The Programming Format

An easy to use Programming Format has been adopted, to make Accord xpC program-

ming as simple as possible. Each system parameter has been allocated to a Program-

ming group. To programme a parameter select the programming group, select the

parameter and enter the desired value.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO Accord Installationshandbuch Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Accord