ADEMCO Vista-128FB Einstellungsanleitung PDF herunterladen (Seite 92)

VISTA-128BP/VISTA-250BP Installation and Setup Guide

5-18

2*81

Pager 7 Trigger Event Enables

0 = disable

1 = enable

This field has five entries as follows: Alarm, Trouble, Bypass, Open/Close,

System.

If enabled, the system sends a signal to the pager.

2*82

Pager 8 Phone Number

Enter 0-9; #11 for *, #12 for #, #13 for a 2-

second pause.

Enter the paging service phone number for Pager 8. Enter up to 17 digits. Do

not fill unused spaces.

2*83

Pager 8 ID Number

Enter 0-9

Enter the Pager ID number for Pager 8. Enter up to 10 digits.

2*84

Pager 8 Format

0 = numeric

1 = ID

2 = alphanumeric

Enter the pager format for Pager 8.

2*85

Pager 8 Delay 1

000-060 seconds.

This delay occurs after the phone number is dialed and before the pager ID is

sent, giving the pager system time to answer the phone call.

NOTE: Program only if using numeric format.

2*86

Pager 8 Delay 2

000-060 seconds.

This delay occurs after the pager ID is sent and before the event information is

sent.

NOTE: Program only if using numeric format.

2*87

Pager 8 Partition Enable

0 = disable

1 = enable

This field has eight entries, one for each partition. If enabled, the system sends

messages to Pager 8 for the partition(s).

2*88

Pager 8 Trigger Event Enables

0 = disable

1 = enable

This field has five entries as follows: Alarm, Trouble, Bypass, Open/Close,

System.

If enabled, the system sends a signal to the pager.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 146 147

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO Vista-128FB Einstellungsanleitung Seite 92

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Vista-128FB