ADEMCO Vista-128FB Einstellungsanleitung PDF herunterladen (Seite 68)

VISTA-128BP/VISTA-250BP Installation and Setup Guide

4-6

ZONE # 1st 2nd ZONE # 1st 2nd ZONE # 1st 2nd ZONE # 1st 2nd

209

14 00

227

02 00

244

04 00

ALARM RST.

00 00

210

15 00

228

03 00

245

05 00

TROUBLE

00 00

211

01 00

229

04 00

246

06 00

TRBLE. RST

00 00

212

02 00

230

05 00

247

07 00

BYPASS

00 00

213

03 00

231

06 00

248

08 00

BYP. RST.

00 00

214

04 00

Zone Response Type Definitions

Each zone must be assigned a zone type, which defines

the way in which the system responds to faults in that

zone. There are three keypad-activated zones (panic

keys; see note) for each partition, a polling loop

supervision zone, and four RF supervisory zones, two

for each RF receiver installed. Zone types are defined

below.

Type 00: Zone Not Used

Program with this zone type if the zone is not used.

Type 01: Entry/Exit #1 Burglary

Provides entry delay whenever the zone is faulted and

the system is armed in the AWAY or STAY mode.

When the panel is armed in the INSTANT or

MAXIMUM mode, no entry delay is provided. Exit

delay begins whenever the control is armed, regardless

of the arming mode selected. These delays are

programmable.

Assign this zone type to zones that are used for

primary entry to and exit from the facility.

Type 02: Entry/Exit #2 Burglary

Provides a secondary entry delay, if the system is

armed in the AWAY or STAY modes and the zone is

faulted. When the panel is armed in the INSTANT or

MAXIMUM mode, no entry delay is provided.

Secondary exit delay begins whenever the control is

armed, regardless of the arming mode selected. These

delays are programmable.

Assign this zone type to zones that are used for entry

and exit of the facility and require more time than the

primary entry and exit point. Delay times for this

zone type must be greater than those for zone type 01

(e.g., a garage, loading dock, or basement door).

Type 03: Perimeter Burglary

Provides an instant alarm if the zone is faulted and

the system is armed in the AWAY, STAY, INSTANT,

or MAXIMUM mode.

Assign this zone type to all exterior door and window

zones.

Type 04: Interior, Follower

Provides a delayed alarm (using the programmed entry

delay time) if an entry/exit zone is faulted first.

Otherwise it produces an instant alarm. It is active

when the system is armed in the AWAY or MAXIMUM

mode, but the MAXIMUM mode eliminates the entry

delay.

If the Interior Follower zone is programmed for one of

the STAY modes (default is STAY mode 1), it is

automatically bypassed when the panel is armed in the

STAY or INSTANT mode.

Assign this zone type to a zone covering an area such

as a foyer, lobby, or hallway through which one must

pass upon entry or exit (to and from the keypad).

Type 05: Trouble by Day/Alarm by Night

Provides an instant alarm if the zone is faulted and

the system is armed in the AWAY, STAY, INSTANT,

or MAXIMUM mode. During the disarmed state (day),

the system annunciates a latched trouble sounding

from the keypad (and a central station report, if

desired).

Assign this zone type to a zone that contains a foil-

protected door or window (such as in a store), or to a

zone covering a sensitive area such as a stock room or

drug supply room. It can also be used on a zone in an

area where immediate notification of an entry is

desired.

Type 06: 24-Hour Silent Alarm

Sends a report to the central station but provides no

keypad display or sounding. Assign this zone type to a

zone containing an Emergency button.

Type 07: 24-Hour Audible Alarm

Sends a report to the central station and provides an

alarm sound at the keypad and an audible external

alarm. Assign this zone type to a zone containing an

Emergency button.

Type 08: 24-Hour Auxiliary Alarm

Sends a report to central station and provides an

alarm sound at the keypad only. (No bell output is

provided.) Assign this zone type to a zone an

Emergency button or one containing monitoring

devices such as water sensors or temperature sensors.

Type 09: Supervised Fire (Without Verification)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 146 147

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO Vista-128FB Einstellungsanleitung Seite 68

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Vista-128FB