ADEMCO Vista-128B PLUS Einstellungsanleitung PDF herunterladen (Seite 66)

— 66 —

Automatic Refresh: The system automatically updates the status of all Time-Driven Events upon any of the following

occurrences:

• Changing of the time or date via #63 mode

• Exiting #80 Scheduling Menu mode

• Exiting Program mode

• After a disconnect from the downloader

• On a power-up

• At Daylight Saving Time adjustment.

Below is a list of the "Action" codes (desired actions) used when programming time-driven events. Note that these codes are

independent of the "relay codes" programmed during the #93 Menu Mode–Output Programming mode. If using Time Driven

Events, the following menu items must first be programmed using #93 Menu Mode - Output Programming:

Enter Relay No. (reference identification number)

Relay Group (if applicable)

Restriction

Relay Type (V-Plex, 4204/4204CF, FSA, or X-10)

Zone No. (V-Plex)

ECP Address (4204/4204CF or FSA)

Relay No. (4204/4204CF)

LED No. (FSA)

House Code (X-10)

Unit Code (X-10)

Relay commands:

Action Specifier for commands 01-05 is Relay No.; Action Specifier for commands 06-10 is Relay Group No.

01 = Relay On 02 = Relay Off

03 = Relay Close for 2 seconds 04 = Relay Close XX minutes (field 1*74)

05 = Relay Close YY seconds (field 1*75) 06 = Relay Group On

07 = Relay Group Off 08 = Relay Group Close for 2 seconds

09 = Relay Group Close XX minutes (field 1*74) 10 = Relay Group Close YY seconds (field 1*75)

Arm/Disarm commands:

Action Specifier for commands 20-24 is Partition(s). Activation times 1 (Beginning), 2 (End), 3 (During), 5 (Random Start), 6

(Random End), 7 (Random During) are the only valid choices for auto-arming and disarming functions.

20 = Arm-Stay 21 = Arm Away

22 = Disarm 23 = Force Arm Stay (Auto-bypass faulted zns)

24 = Force Arm Away (Auto-bypass faulted zns) 25 = Arm Instant

26 = Arm Maximum

Bypass commands:

Action Specifier for commands 30-31 is Zone List #, Activation times 1 (Beginning), 2 (End), 3 (During), 5 (Random Start), 6

(Random End), 7 (Random During) are the only valid choices for bypass commands.

30 = Auto bypass - Zone list 31 = Auto unbypass - Zone list

Open/Close Windows:

Action Specifier for commands 40-41 is Partition(s), and for 42 is Access Group. Activation time 3 (During), 7 (Random

During) are the only valid choices for these commands.

40 = Enable Opening Window 41 = Enable Closing Window 42 = Enable Access Window

Access Control Commands

Action Specifier for commands 55-60 is Access Point, for 61-66 is Group, for 67-72 is Partition, and for 73-74 is Trigger.

55 = Access Point Grant 56 = Access Point Grant with Override

57 = Access Point Protect 58 = Access Point Bypass

59 = Access Point Lock 60 = Access Point Exit

61 = Access Point Group Grant 62 = Access Point Group Grant with Override

63 = Access Point Group Protect 64 = Access Point Group Bypass

65 = Access Point Group Lock 66 = Access Point Group Exit

67 = Access Point Partition Grant 68 = Access Point Partition Grant with Override

69 = Access Point Protect by Partition 70 = Access Point Bypass by Partition

71 = Access Point Lock by Partition 72 = Access Point Exit by Partition

73 = Access Point Trigger On 74 = Access Point Trigger Off

Additional Commands

Action Specifier for command 78 is Group.

78 = Access Point Group Disable

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO Vista-128B PLUS Einstellungsanleitung Seite 66

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Vista-128B PLUS