ADEMCO VISTA-20HWse Anleitung zur Fehlerbehebung PDF herunterladen (Seite 7)

–7–

Section 1. GENERAL DESCRIPTION

The VISTA-20HWSE is a 2-partition control that supports up to 16 zones, using basic hard-wired

and wired expansion zones, plus 3 keypad activated zones.

Basic Hardwired Zones

Provides 8 basic hardwired zones having the following characteristics:

• EOLR supervision supporting N.O. or N.C. sensors

• Programmable response time (10, 350, or 700 milliseconds)

• Individually assignable to either partition

• Up to sixteen 2-wire smoke detectors on zone 1

• 4-wire smoke or heat detectors on zones 2 through 7 (as many as can be

powered from AUX power on the control)

• Up to fifty 2-wire latching type glassbreak detectors on zone 8 with auto

reset

Optional Expansion Zones (up to 8)

Supports up to 8 additional wired zones using a 4219 expansion module or

4229 expansion/relay module, each zone having the following characteristics:

• EOLR supervision supporting N.O. or N.C. sensors

• 300–500 msec normal response with an option for fast (10–15 msec)

response on loop A (first expansion zone)

Two Partitions

• Provides the ability to control two separate areas independently, each area

functioning as if it had its own separate control

• Zones assignable to either partition 1 or 2

• Relay and Powerline Carrier device outputs assignable to either partition 1

or 2, or to both partitions

• Certain system options, such as Entry/Exit delay and Subscriber Account

number, programmed independently for each partition

• Common Zone option allows either partition to arm, while leaving a

common area (ex. lobby or foyer) disarmed for access into the other

partition. Refer to the ZONE LISTS section for details on programming a

common zone.

In UL installations, the system may be configured as a single partition only.

Remote Keypads

Up to 4 of any of the following keypads may be used in each partition:

Fixed-Word Keypads: 4127*, 4137AD, 6127*, 6137, and 6128.

* These keypads cannot be used if the 4285 Phone Module is being used.

Alpha Keypads: 5137AD, 6139 (2-line alphanumeric displays)

6138 (1-line alphanumeric display).

For programming from a keypad, a 5137AD or 6139 2-line Alpha keypad must be

connected to partition 1 (but need not stay in the system).

1 2 3 4 5 6 7 8 9 10 11 12 ... 83 84

Keine Kommentare

ADEMCO VISTA-20HWse Anleitung zur Fehlerbehebung Seite 7