ADEMCO VISTA-20HWse Anleitung zur Fehlerbehebung PDF herunterladen (Seite 59)

–59–

Adding Custom Words (will not be annunciated by 4285 Phone Module)

You can add up to 10 installer-defined words to the built-in vocabulary. Each of

the 10 "words" can actually consist of a "word string" of one or more words, but

no more than

ten

characters can be used for each word or word string.

When adding Custom

Words, the keypad keys

perform the following

functions:

[4] Moves cursor one space

to the left.

[6] Moves cursor one space

to the right.

[8] Saves the new word in

the system's memory.

1. Perform steps 1, 2, and 3 of Programming the Descriptors on a previous

page.

Select CUSTOM WORD mode (enter “1”) when the prompt CUSTOM WORD

? is displayed.

2. Enter the number ([01]–[10]) of the custom word or word string to be created

(for example, if you are creating the first custom word or word-string, enter

[01], for the second, enter [02], etc.). A cursor will now appear at the

beginning of the second line.

3. Refer to the CHARACTER LIST of letters, numbers, and symbols on a

following page.

Press the [#] key, followed by the two-digit entry for the first letter you would

like to display (e.g., [6][5] for "A").

The cursor will then move to the right, in position for the next character.

4. Repeat step 3 to create the desired word(s). Note that the [4] key can be

used to move the cursor to the left, if necessary. Remember, no word or

word-string can exceed 10 characters.

5. Press the [8] key to save the custom word(s) and return to the "CUSTOM

WORD ?" display.

Repeat steps 2–5 for other custom words to be entered. To change a custom

word, just overwrite it. If no more are to be entered now, press [0] to return to

the Descriptor entry. The custom word(s) will be automatically added to the

built-in vocabulary.

When zone descriptors are being entered as described in step 6 of

Programming the Descriptors, the custom word numbers are 245 to 254 for

words 1 to 10 respectively.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 83 84

Keine Kommentare

ADEMCO VISTA-20HWse Anleitung zur Fehlerbehebung Seite 59