ADEMCO Vista-50 Bedienungsanleitung PDF herunterladen (Seite 9)

– vii –

HOW TO USE THIS MANUAL

This manual is written to accommodate both the new and the experienced installer of

Ademco products. A general description of the entire system is located at the

beginning of the manual, followed by the basics of programming. The wiring and

physical setup of the hardware follows.

The sections at the core of the manual include both hardware setup and

programming requirements of each device to make that specific device operational in

the system. A checkout procedure is included at the end of each section. We

recommend this method to ensure that each device is working properly before

proceeding to the next section. It must also be used if you are making a particular

addition to the system of one of these devices.

Each of the sections covering the installation of peripheral devices includes the

programming for that device. If you are an experienced user of Ademco products, you

may choose to wire and then program the entire system at once. If so, refer to

Sections 18 through 20 (for complete system programming options) after the

hardware setup is complete. A blank pull-out programming form is included with

this manual. Use this in addition to the #93 and #80 Menu modes for complete

system programming options.

Without an understanding of the programming methodology, you will not be able to

successfully perform the required programming in each of these sections. We

therefore urge you to read Section 4: THE MECHANICS OF PROGRAMMING

before any programming is performed.

This manual uses various icons to denote critical notes and technical tips to assist

you with the installation of this system. These are easily seen in the lefthand column

of the relevent information.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 195 196

Keine Kommentare

ADEMCO Vista-50 Bedienungsanleitung Seite 9