ADEMCO Vista-50 Bedienungsanleitung PDF herunterladen (Seite 31)

– 19 –

#93 Menu Mode Programming

The #93 Menu Mode is a mode through which much of the system's

programming is done. It offers main menu selections for the following:

Zone Programming

Serial Number Programming

Alpha Programming

Device Programming

Relay Programming

Relay Voice Descriptors

Custom Index Programming (VIP Module substitute words)

Press 0 (NO) or 1 (YES) in response to the displayed menu selection. Pressing

0 will display the next choice in sequence. The keypad will then prompt you with

questions regarding the programming of a particular zone or device. (Refer to

the individual sections to program each option shown.)

The following is a list of commands used while in the menu mode.

#93 Menu Mode Key Commands

#93 Enters Menu mode

[*] Serves as ENTER key. Press to have keypad accept entry.

[#] Backs up to previous screen.

0 Press to answer NO

1 Press to answer YES

00+[*] Escapes from menu mode, back into data field programming

mode, if entered at the first prompt of each main menu option.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 195 196

Keine Kommentare

ADEMCO Vista-50 Bedienungsanleitung Seite 31