ADEMCO Vista-50 Bedienungsanleitung PDF herunterladen (Seite 118)

– 106 –

2*00 NUMBER OF PARTITIONS

Enter the number of partitions (1-8) to be used in the system.

2*01 DAYLIGHT SAVINGS TIME | |

START/END MONTH

Enter the months 00-12 in which daylight savings time starts and ends.

Enter 00, 00 if daylight savings time does not apply to the user's region.

Standard setting for U.S. is 04,10.

2*02 DAYLIGHT SAVINGS TIME | |

START/END WEEKEND

Enter the start and end weekends for daylight savings time as follows:

01=first; 02=second; 03=third; 04=fourth; 05=last; 06=next to last;

07=third from last. Standard setting for U.S. is 01,05.

2*05 AUTO-ARM DELAY (partition-specific) |

Enter the time between the end of the arming window and the start of

auto arm warning time in values of 01-14 times 4 minutes. Enter 00 if no

delay is desired. Enter 15 if auto arming is not desired.

2*06 AUTO-ARM WARNING PERIOD (partition-specific) |

Enter the time 01-15 in one minute increments during which the user is

warned by a keypad sounding and display to exit the premises prior to

auto arming of the system.

2*07 AUTO-DISARM DELAY (partition-specific) |

Enter the time between the end of the disarming window and the start of

auto disarming of the system in values of 01-14 times 4 minutes. Enter

00 if no delay is desired. Enter 15 if auto disarming is not desired.

2*08 ENABLE FORCE ARM FOR AUTO-ARM

(partition-specific)

Enter 1 if the system should automatically bypass any faulted zones

when it attempts to auto arm. Otherwise enter 0.

2*09 OPEN/CLOSE REPORTS BY EXCEPTION

(partition-specific)

Enter 1 if it is desired that open/close reports be sent only if the

openings/closings occur outside the arm and disarm windows. Open

reports will also be suppressed during the closing window in order to

prevent false alarms if the user arms the system, then reenters the

premises to retrieve a forgotten item. Note that openings and closings

are still recorded in the event log. Enter 0 if exception reporting is not

desired. Note: This field must be set to 1 if late/early opening, late/early

closing, and no opening/closing reports are to be sent (2*13, 2*14).

2*10 ALLOW DISARMING ONLY DURING ARM/DISARM

WINDOWS (partition-specific)

Enter 1 if disarming of the system should be allowed only during the

arming/disarming windows, or if the system is in alarm (if 2*11 is set to

"1"). Note that this applies only to operator level users. Installer, Master

and manager level users can disarm the system at any time. Enter 0 if

disarming can occur at any time.

0=disable for displayed partition; 1=enable for displayed partition

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 195 196

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO Vista-50 Bedienungsanleitung Seite 118

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Vista-50