ADEMCO Vista-50 Bedienungsanleitung Seite 21
- Seite / 196
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
– 9 –
The following is an example of a typical display:
S Y S T E M 1 2 3 4 5 6 7 8
S T A T U S R R N N A * B
Possible status indications include:
A = Armed Away M = Armed Maximum
S = Armed Stay I = Armed Instant
R = Ready N = Not Ready
B = Bypassed/Ready * = Alarm Memory/Trouble present
To obtain more information regarding a particular partition, enter * + [Partition
No.] (i.e., *4). In order to affect that partition, the user must use a code that has
access to that partition. Also, in order for a user of any partition to log onto
Partition 9 to view the status of
all
partitions, that user must have access to all
partitions. Otherwise, access will be denied.
The following is an example of what would be displayed for a fault condition on
Zone 2 (Loading Dock Window) on Partition 1 (Warehouse) when logging on
from a keypad on Partition 9:
WHSE DISARMED
HIT * FOR FAULTS
This is the normal display that appears at Partition 1's keypad(s). Pressing* will
display:
FAULT 02 LOADING
DOCK WINDOW
Additional zone faults will be displayed one at a time. To display a new partition's
status, press * + [Partition No.]. This will display the status of the new partition.
The "Armed" LED on a Master keypad will be lit only if
all
partitions have been
armed successfully. The "Ready" LED will be lit only if
all
partitions that are
disarmed are "ready to arm." Neither LED will be lit if only some partitions are
armed and only some disarmed partitions are "ready."
The sounder on a Master keypad will reflect the sound of the most critical
condition on all of the partitions. The priority of the sounds is as follows:
A. Pulsing fire alarm sounds
B. Steady burglar alarm sounds
C. Trouble sounds (rapid beeping)
The sounder may be silenced by pressing any key on the Master keypad or a
keypad on the partition where the condition exists.
A Master keypad uses the same panics as Partition 1. Master keypad panics are
sent to Partition 1, and will activate on Partitions 1. Therefore, panics must be
programmed for Partition 1.
- VISTA-50P 1
- VISTA-50PUL 1
- TABLE OF CONTENTS 3
- LIST OF FIGURES 8
- HOW TO USE THIS MANUAL 9
- Polling Loop Expansion: 13
- Wireless Expansion: 13
- Wireless Expansion 13
- Device Programming Mode 14
- Common Lobby Logic 17
- DATA FIELD 17
- DESCRIPTIONS) 17
- COMMON LOBBY 19
- Figure 3 24
- Figure 4 24
- TRIGGERS 25
- Figure 5 25
- Figure 6 26
- POWER-UP PROCEDURE 27
- SPECIFICATIONS AND 32
- ACCESSORIES 32
- Figure 8 33
- IMPORTANT: 34
- Figure 10 38
- Figure 9 39
- FINAL POWER UP 39
- PROCEDURE 39
- Figure 11 39
- VOLTAGE TRIGGERS 41
- Figure 12 41
- Wire Gauge Max. Length 45
- #22 gauge 650 feet 45
- #20 gauge 950 feet 45
- #18 gauge 1500 feet 45
- #16 gauge 2400 feet 45
- FINAL POWER-UP PROCEDURE 46
- FINAL POWER UP PROCEDURE 47
- (5700/5800 series) 53
- Figure 15 55
- Device Programming 55
- Programming 56
- House ID 57
- Device Address 57
- PROGRAMMING WIRELESS ZONES 58
- Go/No Go Test Mode 67
- Transmitter ID Sniffer Mode 67
- Programming Options Defined 68
- Time Driven 68
- 4204 RELAY MODULE 69
- restores 71
- STOP (STP): 72
- SCHEDULING OPTIONS 74
- (VIP) MODULE 77
- VOICE MODULE 79
- #93 MENU MODE PROGRAMMING 80
- DEVICES 80
- Section 11 81
- Figure 19 82
- MODEL EAGLE SECURITY 83
- AUDIO ALARM VERIFICATION 84
- Figure 20 84
- 1 2 3 4 5 6 7 8 9 85
- J7 CONNECTOR 86
- 4142TR CABLE 86
- RELAY OUTPUTS AND POWERLINE 87
- CARRIER DEVICES 87
- Figure 23 89
- 2.8A maximum 91
- Figure 26 92
- Section 14: EVENT LOG OPTIONS 94
- SETTING THE REAL TIME CLOCK 95
- CLEAR EVENT LOG 97
- 0=NO 1=YES 97
- Figure 28 98
- Figure 29 98
- NO CONNECTION 99
- RED (+)BLK (–) 99
- THE MECHANICS OF PROGRAMMING 100
- Battery Calculation Worksheet 101
- 95 96 99 107
- 109
- 109
- 12345678 112
- 95 96 99 Duress 113
- 119
- ZONE PROGRAMMING 121
- PROGRAMMING 121
- ALPHA PROGRAMMING 121
- ZONE TYPE DEFINITIONS 121
- ∗) to exit back to normal 122
- CHARACTER (ASCII) CHART 129
- to exit Menu Mode 131
- * to accept entry 132
- Number (HH:MM) (HH:MM) 140
- Hol. Partition 143
- Mon/Day 1 2345678 143
- HOLIDAY NUMBER ? 143
- Action Codes: 146
- 01 RELAY GRP # ? 146
- GROUP ? 12345678 147
- ACCESS SCHED # ? 148
- MON A1 Window 1? 148
- MON A1 Window 2 ? 148
- 06 ENTER OUTPUT# 151
- 06 Days? MTWTFSS 152
- ], or [A] = 95;Duress = 92 154
- NOTES Note: Low Speed will 157
- Other brands are not 162
- Summary of Connections 165
- LOG PRINTER CONNECTIONS 165
- Auth Title 167
- Section 25: KEYPAD FUNCTIONS 173
- ENTER DEVICE NO 177
- REGULATORY AGENCY STATEMENTS 182
- IMPORTANT 188
- SET SWITCHES WITH 188
- BATTERY REMOVED 188
- SUMMARY OF SYSTEM COMMANDS 189
- SPECIFICATIONS 190
- CONTACTING TECHNICAL SUPPORT 191
- WARNING! 194
- N5945-6V2 2/98 195
- N5944-6V1 Rev B 4/99 196
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Vista-50
(132 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.098 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern