ADEMCO Vista 4130XT Bedienerhandbuch PDF herunterladen (Seite 23)

DIGITAL COMMUNICATION

BOARD IINSTALLED)

lBPIN

GROUND START

REMOTE KEYPAD

PHONE LINE (TIP)

CONNECTOR

STRAIGHT

INCOMING

(IF USEOI

10 PIN

—PHONE LINE IRING)

MA LE.T6MALE

(RING)

ADAPTER

HANOSET

(TIP)

— —

. .

12345

REAR OF CONTRC

‘~fi~~~” ti~

(BACK COVER

REMOVED)

a. Aliachthe 24-pin connector tothemating interlacing pins located at

the bottom of the board.

b. Attach the 10-pin connector (if used) to the Remote Keypad connector

(1O-pin socket) at the top of the board via the “Straight” male-to-male

adapter supplied important Eesureto orient the connector with

BLACK lead (pin 1) to the left (when viewing the4130XT from the

rear).

c. On the Digital Communication interface board, attach the interconnect-

ing wires to the terminal block as follows, referring also to Diagram 6:

Communication Interface Wire

Board Terminal

Assignment

Ground Start ‘

2 Incoming Phone Lme (Tip)

3 Incoming Phone Line (Ring)

Handset (Ring)

Handset (Tip)

‘Connect to BLUE lead on 675 Ground Start Module.

d. With a pair of wire-cutting pliers, snip off the 8 square-shaped connector

pins that normally interface to the4152LM and then install the4171 XT

Digital Communication Interface board. Note On later production units,

this procedure will not be necessary, Those units will be accompanied

by a note to that effect.

Attach the main body of the Control tD the Extender Ring, which is att-

ached to the wall-mounted back cover. The Control is properly attached

when it “snaps” into place.

Use the securing screw (supplied with the No. 4143 Extender Ring) to

secure the Control to the back cover (see Diagram 7 for location of

screw hole), then insert the small VISTA XT nameplate supplied into the

recessed opening to cover the screw head, as shown In Diagram 7.

Diagram 6. 4130XT CONNECTOR INTERFACING

AND 4171XT WIRING CONNECTIONS

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO Vista 4130XT Bedienerhandbuch Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Vista 4130XT