ADEMCO 4140XMPT2 Bedienungsanleitung PDF herunterladen (Seite 49)

Spilt/Dual Reporting

Ademco Low Speed

Sescoa/Radionics

4+2 Reporting

Dual reporting (’51 ) sends all

reports to both primary and secondary phone

numbers. Split reporting allows reports to be divided between the phone numbers

according to the fields (1’34) selections. Split/Dual reporting can be selected by

enabling dual reporting and enabling one of the split reporting options in field

●34. If option [1] is selected, all alarms, alarm restores and cancel repwts will go to

both phone numbers,

while all other reports will go to the secondary phone

number. If [2] is selected, open/close and test messages will go to both phone

numbers, while all other reports will go to the primary phone number. Folbwing are

the Split/Dual Reporting options:

Reporting

Field Number

Format

●51 1*34 Where Reports Go

Dual

1 0 All reports to both num.

Split o lor2 1-alarm, alarm restore &

cancel to primary, all

others to secondary.

2=open/close, test to

secondary, all others to

primary.

Split/Dual 1 lor2 1-alarm, alarm restore &

cancel to both, all others

to secondary only.

2=open/close to both, all

others to primary only.

ADEMCO

LOW SPEED is a pulsed format which responds to a 1400 Hz

handshake and kiss-off, and transmits data with 1900Hz pulse tones @ 10

pulses per second (pps), A typical message consists of two rounds which must

be verified by the receiver. A complete standard report consists of either a 3 or 4-

digit account number followed by a 1-digit alarm code. Though 2 rounds are sent,

only the valid report is displayed.

In expanded reporting, two messages are sent, two rounds per message, the first

being the account number and alarm cwde, the second being the zone ID code to

which the alarm was assigned. A complete expanded report consists of a 3 or 4-

digit account number followed by a 1-digit alarm code, then the alarm code is

repeated, followed by the channel number.

EX. Standard:

CCCC E where: CCCC = account number

Expanded:

CCCC E

E = event code

EEEE Z Z = zone ID code

Standard and expanded reporting in the SESCOA/RADIONtCS format is virtually

the same as ADEMCO Low Speed except for the following:

1, The handshake and kiss-off frequency is 2300 Hz.

2. The data is transmitted with 1800 Hz pulse tones.

3. The rate of transmission is 20 pps.

A 4+2 report consists of a 4-digit account number and a 2-digit alarm code, or

event code. 4+2 reports can be accomplished either in ADEMCO Low Speed (1O

pps), or SESCONRADIONICS (20 pps) format.

In 4+2 reporting a unique 2-digit code for each zone is reported. A 4-digit

account number followed by a 2-digit code is sent, where the first digit is the

actual event, such as in ALARM, RESTORE, or TROUBLE, etc., and the second

digit of the code represents the “zone” where the event occurred. (but not

necessarily the actual zone number). Each code in itself is unique to a specific

zone. If desired, the actual zone number can be reported by entering the

corresponding 2-digit zone number (ex. zone

1= [0] [1]; zone 63= [6] [3]). A

report might appear as:

1 234 59 (“5 9“ might be a unique “TROUBLE RESTORE, ZONE 25).

-49-

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO 4140XMPT2 Bedienungsanleitung Seite 49

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO 4140XMPT2