ADEMCO VISTA-250FBP Bedienungsanleitung PDF herunterladen (Seite 5)

VISTA-250FBP (3/17/2003) 13850 - 4

Detection and Alarm

(5) Each RPM (Remote Point Module) enclosure shall be

tamper protected.

b. Wireless Expansion – The control shall support up to 250 wireless

zones using a 5800 series RF receiver (fewer if using hardwire

and/or polling loop zones). Wireless zones shall have the

following characteristics:

(1) Supervised by control panel for check-in signals (except

certain non-supervised transmitters).

(2) Tamper-protection for supervised zones.

(3) Individually assignable to one of eight (8) partitions.

(4) Individually assignable to bell outputs and/or auxiliary

relays.

(5) Support wireless devices listed for Commercial Burglary

using the 5881ENHC RF Receiver.

3. Partitions – The control shall provide the ability to operate eight (8)

separate areas, each functioning as if it had its own control. Partitioning

features shall include:

a. A Common Lobby partition (1-8), which can be programmed to

perform the following functions:

(1) Arm automatically when the last partition that shares the

common lobby is armed.

(2) Disarm when the first partition that shares the common

lobby is disarmed.

b. A Master partition (9), used strictly to assign keypads for the

purpose of viewing the status of all eight (8) partitions at the same

time (master keypads).

c. Assignable by zone.

d. Assignable by keypad/annunciator.

e. Assignable by relay to one or all eight (8) partitions.

f. Ability to display fire and/or burglary and panic and/or trouble

conditions at all other partitions’ keypads (selectable option).

g. Certain system options selectable by partition, such as entry/exit

delay and subscriber account number.

4. User Codes – The control shall accommodate 250 user codes, all of which

can operate any or all partitions. Certain characteristics must be assigned

to each user code, as follows:

a. Authority level (Master, Manager, or several other Operator

levels). Each User Code (other than the installer code) shall be

1 2 3 4 5 6 7 8 9 10 ... 13 14

Keine Kommentare

ADEMCO VISTA-250FBP Bedienungsanleitung Seite 5