ADEMCO VISTA-250FBP Bedienungsanleitung PDF herunterladen (Seite 12)

VISTA-250FBP (3/17/2003) 13850 - 11

Detection and Alarm

29. Automation Software - The Control shall be capable of interfacing with

automation software via an RS232 input on a single partition.

The control panel shall be the ADEMCO VISTA-250FBP Commercial Burglary Partitioned

Security System or equivalent.

2.02 ENCLOSURE

A. The Control Panel shall be enclosed in a metal cabinet, suitable for wall mounting.

The dimensions shall not exceed 18 inches (45.7 cm) in height, 14.5 inches (36.8 cm)

in width or 4.3 inches (10.9 cm) in depth.

2.03 ELECTRICAL POWER REQUIREMENTS

A. System Power – The Fire and Burglary Alarm System shall operate using

standard 120 volts AC, 50/60 Hz power.

1. Control Primary Power – Transformer power shall be 18 VAC, 72VA.

2. Backup Battery – A rechargeable 12 VDC, gel type, lead acid backup

battery shall be provided. The battery shall be rated between 7 and 34-

ampere hours (AH).

3. Alarm Power – Alarm power shall be 10 - 13.8 VDC, 1.7 amps for each

bell output

4. Auxiliary Standby Power – Standby power shall be 9.6 - 13.8 VDC, 1 amp

maximum.

5. Fusing – The battery input, auxiliary, and bell outputs shall be protected

using PTC circuit breakers. All outputs shall be power limited.

2.04. ENVIRONMENTAL CONDITIONS

A. Environmental Conditions – The Fire and Burglary Alarm System shall be

designed to meet the following environmental conditions.

1. Storage Temperature – The system shall be designed for a storage

temperature of -10

C to 70

C (14

F to 158

F).

2. Operating Temperature - The system shall be designed for an operating

temperature of 0

C to 50

C (32

F to 120

F).

3. Humidity - The system shall be designed for normal operation in an 85%

relative humidity environment.

1 2 ... 7 8 9 10 11 12 13 14

Keine Kommentare

ADEMCO VISTA-250FBP Bedienungsanleitung Seite 12