ADEMCO Security System Betriebsanweisung PDF herunterladen (Seite 65)

Side A of N6020-2 Rev B

EVENT LOGGING PROCEDURES

General Information

The system has the ability to record

various events in a history log wherein

each event is recorded in one of five

categories (listed below), with the time

and date of its occurrence. The Event

Log holds up to 224 events, with the

oldest event being replaced by the

logging of any new event after the log is

full. Using an alpha keypad, the Event

Log can be viewed one category at a

time, or can display all events, regardless

of category (ALL EVENT LOG). The

system also allows selection of

displaying the COMPLETE log, or only

those events occurring since the last

installer service (RECENT). In addition,

events in the other partitions can be

viewed by users authorized to access

those partitions. Note that events are

displayed in chronological order, from

most recent to oldest.

To Display The Event Log

1. Enter CODE + [#] + [6] + [0]

2. Select the display mode.

RECENT: Displays only those

events occurring since last installer

service.

COMPLETE: Displays complete

event log (up to 224 events).

Press the desired key, 0 or 1.

ENTER 0 = RECENT

1 = COMPLETE

3. Select the partition, 0-8.

Enter the partition number for the

partition whose events are to be

displayed.

Entering 0 (NO) will display all

partitions' events.

SCAN LOG BY PART

0=NO 1-8=PART #

1 2 ... 60 61 62 63 64 65 66

Kommentare zu diesen Handbüchern

Keine Kommentare