ADEMCO Alpha Vista Console Bedienungsanleitung PDF herunterladen (Seite 37)

‘VIEWING CAPABILITIES

OF A USER

VIEWING

DOWNLOADED

MESSAGES

USING THE BUILT-IN

USER’S GUIDE

DISPLAYING

DESCRIPTORS

PANIC KEYS

Enter a security code + [*] + [*] to view the user ID number and the authority

level for that code. These items will typically be displayed as follows:

The user’s OpetiClose repod capability is shown by the dot following the

authority level. If Open/Close is not enabled for a user, the dot will not appear.

Users may occasionally receive messages on the console display from their

installation company. Whenthis omurs, theconsole will display ’’Message. Press

Ofor5secs.”. instruct theuser topress andhold the Okeytodisplay the central

station’s message. Note that the system must be in the READY state to view

these messages.

An abbreviated User’s Manual is stored in the system’s memory, and can be

patiicularly useful to the end user if the ptinted User’s Manual is not conveniently

accessible when the user needs to peflorm a seldom used and unfamiliar system

procedure. The Built-in User’s Guide is displayed by simply pressing any of the

function keys (e.g., OFF, AWAY, STAY, MAXIMUM, BYPASS, INSTANT, CODE,

TEST, READY, #, and CHIME) for approximately 5 seconds and then releasing it.

Abbreviated instructions relative to the key that has been pressed will then be

displayed (2 lines of text are displayed at a time). This function is available when

the system is in the armed or the disarmed state.

The Alpha Consoles candisplay allprogrammed descriptors, which is useful to

the installer when checking entties, and can be helpful to the user when there is a

need to identify zones. Todisplay descriptors, press and hold the READY key

until the built-in instructions for that key appear, then release the key. The zone

descriptors will appear one at a time, for about 2-3 seconds each. For faster

viewing, press the READY keyto display the next descriptor in numerical order

and soon. When alldescriptors have been display ed, the Control will exit display

mode. Toexitdisplay mode before alldescriptors have been display ed, enter the

security code and press the OFF key.

There are three pairs of keys (~ + 1], [# + 3], ~ + #]) that, if programmed, can be

used to manually initiate alarms and send a repofl to the central station. Each pair

of keys can be individually programmed for24Hour Silent, Audible or Auxiliaw

(Emergency) responses. Thepanic function inactivated when theapproptiate

pair of keys are pressed at the same time.

The panic functions are identified by the system as follows:

PANIC PAIR

Dis~laved as 7

one

‘+1 95

#+3

“+#

These panic keys can also be programmed with an alpha descriptor.

IMPORTANT: For the Panic functions to be of practical value, the system must be

connected to a central station.

—.

-37-

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO Alpha Vista Console Bedienungsanleitung Seite 37

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Alpha Vista Console