ADEMCO Accord Bedienungsanleitung PDF herunterladen (Seite 7)

Changing Codes

The system can support up to 8 separate user codes.

MASTER CODE: User 1.

The Master Code (User 1) can be changed:

1. Enter Master Code (e.g. 1234)

2. Press 8/ (CODE)

3. Press 1 (User 1)

4. Enter new User Code (e.g. 5678). Two beeps confirms code acceptance.

PROGRAMMING OTHER USER CODES INTO THE SYSTEM

The Master Code is used to programme new User Codes into the system:

1. Enter Master Code (e.g. 5678).

2. Press 8/ (Code).

3. Press 2 (User 2).

4. Enter User 2 Code (e.g. 4321).

Users can programme their own new User Codes into the system:

1. Enter User Code (e.g. 4321).

2. Press 8/ (Code).

3. Press 2 (User 2).

4. Enter new User 2 Code (9876).

DELETING USER CODES

Any user may delete their own code by entering their CODE + 8 + USER No + Ö:

1. Enter User 2 Code (e.g. 9876).

2. Press 8/ (Code).

3. Press 2 (User 2).

4. Press Ö.

Note: The MASTER CODE can delete any USER CODE.

DURESS - User Code 8/ may have been reserved for a DURESS CODE. This

type of code can perform all normal system functions, but will send a silent

DURESS Signal to your monitoring station

LCD KEYPAD PROGRAMMING

Setting the System

FULL SET

To FULL SET the system:

1. Enter the User Code.

2. Press 1/ (Full Set).

A constant exit tone will sound. During the exit period, the DAY LCD symbol

 will flash and the exit tone will become broken as the user passes detectors

on the exit route. The exit tone will become constant, when the last detector on

the exit route has been passed. Two confirmation beeps indicate that the system

has set.

Note: To stop the system from setting during the exit period press Ö. When

the system has set, Ö will no longer function. Press # + 1 / (Full

Set) to EASY SET the system, if available.

PART SET

Selected areas will set using the Part Set function. The engineer will programme

which selected areas will set with user approval, (see System Settings).

To PART SET the system:

1. Enter the User Code.

2. Press 2/ (Part Set).

A constant exit tone will sound. During the exit period, the DAY LCD symbol

 will flash and the exit tone will become broken as the user passes detectors

on the exit route. The exit tone will become constant, when the last detector on

the exit route has been passed. Two confirmation beeps indicate that the system

has set

Note: To stop the system from setting during the exit period press Ö.

When the system has set, Ö will no longer function.

Press # + 2/ (Part Set) to EASY SET the system, if available.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO Accord Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Accord