ADEMCO Accord Bedienungsanleitung PDF herunterladen (Seite 4)

Hot Keys

Hot keys are convenient and specific for the alarms specified above.

e.g. To trigger a fire alarm.

1. Press 7 + 9.

2. Fire alarm will sound (pulse tone), all LEDs ON/ .

3. Enter User Code to exit alarm mode.

Additional Information

Entry Time : Exit Time :

Easy SET : Yes / No

Alarm Company Telephone Number :

Daytime :

Night-time :

Hotkey Enabled : Yes / No

Testing the System [5]

To TEST the system:

1. Enter the User Code.

2. Press 5 (TEST).

Note: The outside bell/sounder will ring for 5 seconds and the strobe will flash until

the test is finished. All LEDS on the keypad will light up for 5 seconds. Test each

zone individually when the keypad stops scrolling and the bell/sounder stops

ringing. Activate the zone to verify display of zone on the LCD, two beeps will

sound. To exit test mode enter the User Code and wait for two beeps.

Omitting Zones [6]

To Omit Zones:

1. Enter the user code.

2. Press 6 (Omit).

3. Enter the Zone Number(s) to be isolated.

4. Press Ö to finish or wait 5 seconds.

5. Set the system

e.g. To omit zones 6, 7 and 8, press 1234 6 678. Zone LED 6, 7 and 8 will flash.

Press Ö or wait 5 seconds.

To correct a wrong omitted zone:

1. Enter the User Code

2. Press 6 (Isolate)

3. Press Ö or wait for a confirmation beep.

Note: Fire, Silent PA and PA cannot be isolated.

Unsetting the system, will restore normal operation and all zones.

yeKtoHepyTNdapyeK

DCL

yalpsiD

1 ecnatsissA6+4

2 er iF9+7

3 cinaP

Ö #+

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO Accord Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO Accord