
Setting the Date and Time
The system contains a clock which is used to record the DATE AND TIME of each
event as it occurs.
To Set the clock:
1. Enter User Code.
2. Press # + 0.
3. Enter ddmmyyhhmm (day, month, year, hour, minute). Two confirmation beeps
acknowledge correct entry.
Note: Users cannot view time
Chime Facility [9]
Any zone can be programmed to give a CHIME (2 beeps from the keypad and 2
beeps from the internal sounder) when operating the zone.
To programme a zone to Chime:
1. Enter User Code
2. Press 9 (Chime)
3. Enter zone for Chime.
4. Press Ö to finish or wait for confirmation beep.
To disable the chime facility on all zones:
1. Enter User Code
2. Press 9 (Chime) and press Ö
Viewing the Log [0]
The User can VIEW the last 16 alarm zones:
1. Enter User Code.
2. Press 0.
The most recent alarm zones are displayed first, indicated by the zone LED and a
single beep.
6
11
Setting the Date and Time
The system contains a clock which is used to record the DATE AND TIME of each
event as it occurs.
To Set the clock:
1. Enter User Code.
2. Press # + 0.
3. Enter ddmmyyhhmm (day, month, year, hour, minute). Two confirmation beeps
acknowledge correct entry.
Chime Facility
Any zone can be programmed to give a CHIME (2 beeps from the keypad and 2
beeps from the internal sounder) when operating the zone.
To programme a zone to Chime:
1. Enter User Code
2. Press 9/ (Chime)
3. Enter zone number for Chime.
4. Press Ö to finish or wait for confirmation beep.
To disable the Chime on all zones enter User Code, press 9 then
Ö
.
The Chime function cannot be disabled on individual zones. Entering and exiting
programming mode will delete all Chimes.
Viewing the Log
The User can VIEW the last 16 alarm zones:
1. Enter User Code.
2. Press 0.
The most recent alarm zones are displayed first on the LCD with a single beep.
Kommentare zu diesen Handbüchern