ADEMCO VISTA-5OUL Betriebsanweisung PDF herunterladen (Seite 29)

General

Arming

Disarming

USING THE KEYSWITCH

Your system may be equipped with a keyswitch for use when arming and disarming. A

red and green light on the keyswitch plate indicate the status of your system as follows:

Green Light: Lights when the system is disarmed and ready to be armed (no

open zones). If the system is disarmed and the green light is off,

it indicates the system is not ready (one or more zones are

open).

Red Light: Lights when system is armed or memory of alarm exists.

Lit Steady: System is armed in AWAY mode.

Slow Flashing: System is armed in STAY mode.

Rapid Flashing: Memory of alarm, indicating an alarm has occurred.

To arm in the AWAY mode, turn the key to the

right for 1/2 second and release. Consoles will

beep twice and the red light will stay on steady.

To arm in the STAY mode, turn the key to the

right and hold for longer than 3 seconds, then

release. Consoles will beep three times and the

red light will flash slowly.

To disarm the system, turn the key to the right

and release. If an alarm has occurred, the red light

will be flashing rapidly (memory of alarm).

-29-

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 65 66

Keine Kommentare

ADEMCO VISTA-5OUL Betriebsanweisung Seite 29