ADEMCO 4160-12 C-COM Spezifikationen PDF herunterladen (Seite 6)

+12 volts when armed

10. Duress Digit

space protection devices.

The duress digit is a change to the last digit of the security code.

Its purpose is to dllow someone to initiate a silent panic condition

but still give the impression that the control'is working nonally.

For example,

if the security code is 1234 and the duress digit is

5, entering 1234 will cause the system to disarm, but entering 1235

(assuming one is in a hostage situation) will cause the system to

disarm, but will also trigger the communicator to send a silent panic

message.

MJTE: If the user of the system inadvertently programs a secondary

security code that is the same as the master code, but has the

same last digit as the PR@4 programed duress digit, the duress

silent panic capability is suppressed to avoid the transmission

of false alarms to the central alarm monitoring service.

Il.

12.

13.

14.

Security Cade

This 4 digit code restricts the use of the system to only those who

know the code.

Any digits, including repetitions, may be chosen.

There are two such codes.

One is PROM programmed at installation

and the second is user changeable from a keypad at any time, using

the master code to enable the change.

Forced

Arming Enable

Forced arming allows a user to arm the system even though certain

zones are in a faulted condition. Such faulted zones will be shunted

.by depressing BYPASS to override the fail safe arming during'the aming

period.

Forced arming must be PROM enabled for each zone in which

it is desired (with critical zones, such as safes for instance, arming

of the syste+&hould be prevented when a faulted condition exists).

Bypass

Enable

Zones in the system may be individually bypassed from the Security

Console or Remote Keypad during the disarmed period. This option

allows the user to bypass zones that should be ignored, whether or

not they are faulted at arming time (In this manner, "Swingers" may

be ignored or a loading dock door that must be later opened can be

left unsecured). To allow individual zone bypass, each such zone

must be PROM enabled for 'this option.

20~ Restore En&de

As shipped, the system has all zones set up as non-restore zones.

Non-restore means that once a zone has gone into alarm during the

arming period,

subsequent faults of that zone will not trigger a

new alarm. The zone is effectively "locked-out", preventing multiple

false alarms in the event of a "Swinger".

Zones that have been PROM selected as restore'zones will allow the

bell/siren to sound more than once if the zone returns to nonnal

and faults again after the bell/siren has timed out.

628-6

683

ADEMCO 4160-12 C-COM Spezifikationen Seite 6

Kommentare zu diesen Handbüchern

ADEMCO 4160-12 C-COM Spezifikationen Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO 4160-12 C-COM