ADEMCO 4160-12 C-COM Spezifikationen PDF herunterladen (Seite 14)

are present tjmultaneously.

BYPASS Key:

When depressed subsequent to entry of the security

code and followed by one or more zone number(s) (1 to 6) while

in the disarmed state, will individually shunt the zone(s) designated

[provided that the prograrnning of the system permits the shunting

of the particular zone(s)].

When depressed subsequent to entry of the security code and

either the AWAY or STAY keys, the burglary system will arm with

any faulted zones shunted [provided that'the programming of

the system permits the forced automatic shunting of the faulted

zone(s)].

II(sTANT Key:

When depressed subsequent to entry of the security

code and either the AWAY or STAY keys, the burglary system will

arm with the entry delay disabled on any zones designated as

entry/exit zones making them instant alarm zones for.subsequent

entry.

The entry delay is restored subsequent to the system

being turned off.

CDIIE Kcy: When depressed subsequent to entry of the security

code, will permit the entry of a secondary user changeable 4

digit security code.

The code permits the performance of all

of the functions permitted by the PROM programned master code

except change of itself to a new code.

In addition, the secondary

code is blocked from performance of a,ny of its functions when

:;;t;;;tem is armed with the master code, as an added security

Repeating digits are permitted in code entrles and

if the iecondary code entered happens to be the same code as

the master code except for the secondary code last digit matching

the duress digit, the duress silent panic capability will be

suppressed until the secondary code is changed so as to 'avoid

needless false al arms being reported to the central alarm monitoring

service.

CHINE Key:

When depressed subsequent to entry of the security

code during the disarmed state

, will enable a mode where any

fault in Zones 1 or 2 will cause a brief loud tone to be heard

at each security console and remote keypad. The mode can be

disabled by subsequent reentry of the code and depression of

the OFF key.

BEADY LED (Dmea):

This LED is lit whenever all zones are intact

(ready for arming) during the disarmed state.

is off at

other times.

ENTER Key:

When depressed subsequent to security code and function

or mode entry, eliminates the 2 second keying delay that exists

prior to acttng on the function or mode request (use of the

key is optional).

M$blc Signals:

System.Turned WE or .Failure to Arm:

Single brief buzz

sy.st~em Armed MAY

System Armed Sd

Two brief buzzes

Three brief buzzes

628-14

691

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 58 59

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO 4160-12 C-COM Spezifikationen Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO 4160-12 C-COM