ADEMCO 4160-12 C-COM Spezifikationen PDF herunterladen (Seite 51)

To reset, enter the security code

at a console or a keypad and

depress

OFF or turn tk key

at a key arming station.

To Enter Secondary Security Code

This action may be done while the system is armed or disaned.

Key master security code

(in

PROM) and depress CWE key

at a console or

keypad.

I-edlately follow with

entry

the

4 digit secondary code.

This secondary code can permit every function that the master security

code can allow except changing of the secondary security code.

If the

master code is used to arm the system, the secondary code is blocked from

being able to disarm the system (i.e.

master code takes precedence over

the secondary code).

Removal of tk secondary code

is accomplished by entering the master security

code, by depressing CODE, and by entering either a new secondary code

or the master code.

To Activate tk Chime Feature

This mode may only be entered during the disarmed state.

1. Enter tk security code follow& by CHIME depression

at a console or keypad.

2. Any opening In Zone 1 will result in a loud single tone

being produced

at consoles and keypads, annunciating entry.

3. End tk aode by entering tk security

code followed by CHIME depression.

To Quicken tk Execution of Keyed Functions

Up to a 2 second delay exists from the time that a function key is pressed

following security code entry until the function is executed. This delay can

be terminated by pressing the ENTER key at the end of any keying sequence (e.g.

Security Code Entry, STAY, ENTER).

VIII.

~MIffi TtE SYSTEM OVER TO USER

1. Fully explain the operation of the system to the user

by going through

each of the features as well as the OWNERS MANUAL supplied.

Describe the operation of each zone.

Clarify which contacts or devices

are used at night, which are 'used in the interior, which are day/night

(if programed).

Encourage the user to find and remedy their oun zone problems uhen amlng

tk systa.

Show the user how to individually bypass zones as well as

how to force arm the system in the presence of a bad zone.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58 59

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO 4160-12 C-COM Spezifikationen Seite 51

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO 4160-12 C-COM