ADEMCO 4120XM Spezifikationen PDF herunterladen (Seite 50)

MAINTAINING YOUR SYSTEM

(CONTINUED)

Silencing Low

Battery Warning

Tones at the

Console

Routine Care

In addition, a battery-operated smoke detector with a low battery also emits a

single “chirp”sound once approximately every 20-30 seconds, identifying itself as

the smoke detector with the weak battery. If you do not replace a smoke

detector’s low battery, the smoke detector may sound continuously, as if there

were a fire alarm.

lVote; The low battery message comes on as a warning that battery

replacement in indicated sensor(s) is due within 30 days. In the meantime, the

sensor(s) causing the low battery indication is stillfully operational.

Important: Use only batteries recommended by your installer as replacement.

The console’s warning tones can be silenced by performing an OFF sequence

(security code plus OFF key), but the Console’s low battery message display

will remain on as a reminder that you have a low battery condition in one or more

of your sensors. When you replace the weak battery with a fresh one, the sensor

will send a “good battery” signal to the control as soon as the sensor is activated

(opening/closing of a protected door, window, etc.), causing the low battery

display to turn off. If the sensor is not activated, the display will automatically

clear within approximately 1 hour.

●

Treat the components of your security system as you would any other electrical

equipment. Do not slam sensor-protected doors or windows.

Keep dust from accumulating on the console and all protective sensors,

particularly on motion sensors and smoke detectors.

The console and sensors should be cleaned carefully with a dry soft cloth. Do

not spray wateror any other fluid on the units.

-50-

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

Keine Kommentare

ADEMCO 4120XM Spezifikationen Seite 50