ADEMCO Vista AT Betriebsanweisung PDF herunterladen (Seite 16)

– 16 –

Checking For Open Zones

Using the [∗

∗∗

∗] Key to Display and Announce System Status

Before arming your system, all protected doors, windows and other protection zones

must be closed or bypassed; otherwise the keypad will display a "Not Ready"

message.

Use the READY key to display all faulted zones, making it easier for you to identify

and secure any open zone.

1. Press [✱] (do not enter code first) to display faulted

zones.

2. Secure or bypass the zones displayed.

The keypad’s READY indicator lights when all

protection zones have been either closed or bypassed.

3. Arm the system as desired.

Alpha Display:

DISARMED

HIT ∗ FOR FAULTS

Fixed-Word Display:

Zone no. and “NOT READY”

Voice Status: Voice keypads (if installed), can announce system status and faulted

zones (up to 3 zone descriptors) if the Voice Status feature is turned on.

To turn the Voice Status feature on/off:

# + 0 + 2 + 4

(also turns on Voice Chime mode; see Chime mode section)

To announce Status: Press [#] FUNCTION + [0] VOICE + [∗] STATUS key.

(Announces current system status; e.g., “Disarmed Ready to

Arm.”)

To announce faults: Press [#] FUNCTION + [0] VOICE + [∗] STATUS + [∗] again

within 5 seconds of the first press. (Announces up to three

faulted zones with their zone descriptors, if programmed.)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 63 64

Keine Kommentare

ADEMCO Vista AT Betriebsanweisung Seite 16