ADEMCO VISTA-120 Betriebsanweisung PDF herunterladen (Seite 5)

– 5 –

SYSTEM OVERVIEW

Speed Keys

(Macros)

The system can store 4 strings of up to 32 keystrokes per

partition, which can be activated anytime by simply pressing the

"A", "B", "C", or "D" key. This feature can be used to make it

easy to perform a complicated procedure (such as going to

another partition to bypass a zone), or it can be used to simplify

an everyday, repeated procedure. Refer to the SPEED KEYS

section for procedures for using this feature.

Using Schedules Your system may have been programmed with schedules for

automatically arming, disarming and activating various devices

and/or performing other system functions at predetermined times.

Users can modify some of these schedules by manually delaying

a closing time, using temporary schedules, or by programming

special user schedules. Refer to the USING SCHEDULES

section for scheduling related procedures.

Device Timers The system provides up to 20 "timers" which can be used to

control various devices, such as lights or appliances. These

timers are similar in concept to the individual appliance timers that

might be purchased at a department store. The devices that can

be controlled are programmed into the system by the installer.

Up to 16 of these devices can be programmed. Refer to the

PROGRAMMING DEVICE TIMERS section for procedures.

To Access

Another Partition

(GOTO Command)

Each keypad is assigned a default partition for display purposes,

and will show only that partition's information. But, if the user is

authorised, a keypad in one partition can be used to perform

system functions in another partition by using the GOTO

command. Note that only those partitions authorised and

programmed by the installer can be accessed in this manner.

To GOTO another partition, enter your security code, then press

✱

followed by the desired partition number (1-8).

The keypad will remain in the new partition until directed to go to

another partition, or until 120 seconds has elapsed with no

keypad activity. Entering partition number 0 will return the keypad

to its original partition.

1 2 3 4 5 6 7 8 9 10 ... 57 58

Keine Kommentare

ADEMCO VISTA-120 Betriebsanweisung Seite 5