ADEMCO VISTA-100 Bedienungsanleitung PDF herunterladen (Seite 21)

VISTA-100 Installation Instructions

2-4

Sequence #2:

Office 1 Office 2 Lobby Action

User #2:

(Armed) Disarms Disarms

User #1:

Disarms (Disarmed) (No change)

User #2:

(Disarmed) Arms No Change

User #1:

Arms (Armed) No Change

Notice that in Sequence #1, because Office #2 was the last to arm, the lobby also armed

(Office #2 is programmed to affect and arm the lobby). In Sequence #2, the lobby could not

arm when Office #2 armed, because Office #1, which affects the lobby, was still disarmed.

When Office #1 armed, the lobby still did not arm because Office #1 was not programmed to

arm the lobby. User #1 would have to arm the lobby manually. Therefore, if users of a

particular partition are expected to be the last to leave the building, you should program

that partition to affect and arm the lobby.

How User Access Codes Affect the Common Lobby

Codes with "Global" Arming

If you give a code "global arming" when you define it (see Section 27: User Access Codes),

the keypad will display an "ARM ALL?" or "DISARM ALL?" message when the user tries to

arm or disarm the partitions to which he has access, from an alpha keypad. This allows the

user to select the partitions to be armed or disarmed, eliminating the "automatic" operation

of the lobby. Keep in mind, however, that if the user attempts to “arm all,” and another

partition that "affects" the lobby is disarmed, the user will not be able to arm the lobby, and

the message "UNABLE TO ARM LOBBY PARTITION" will be displayed on the keypad.

Codes with "Non-Global" Arming

If the user arms with a non-global code, the lobby partition operation will be automatic, as

described by fields 1*18 and 1*19.

Other Methods of Arming/Disarming

Lobby logic remains active when you arm or disarm a partition that affects and/or arms the

common lobby in one of the following manners:

• Quick-Arm

•Keyswitch

• Wireless button

• Wireless keypad

Arming/Disarming Remotely

If you arm or disarm remotely through V-LINK downloading software, the lobby will not

automatically follow another partition that is programmed to arm or disarm the lobby. The

lobby must be armed separately, after arming all affecting partitions first.

Auto-Arming/Disarming

If scheduling is used to arm and/or disarm partitions automatically, the lobby partition will

not automatically follow another partition that is programmed to arm or disarm the lobby.

When scheduling, you must include the lobby as a partition to be armed or disarmed.

If you are auto-arming, make sure that the

Auto-Arm Delay

and

Auto-Arm Warning

periods

(fields 2*05 and 2*06) combined are longer than that of any other partition that affects the lobby.

This will cause the lobby to arm last.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 233 234

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO VISTA-100 Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO VISTA-100