ADEMCO VISTA-50PEN Betriebsanleitung PDF herunterladen (Seite 62)

– 62 –

Fire Alarm System

General

Your fire alarm system (if installed) is on 24 hours a day, providing

continuous protection. In the event of an emergency, the installed

smoke and heat detectors will automatically send signals to your

Control/Communicator, triggering a loud interrupting sound from the

keypad. An interrupted sound will also be produced by optional

exterior sounders. A FIRE message will appear at your keypad and

remain on until you silence the alarm.

In Case Of Fire Alarm

1. Should you become aware of a fire emergency before your detectors

sense the problem, go to your nearest keypad and manually

initiate an alarm by pressing the panic key assigned as FIRE

emergency (if programmed by the installer) and hold down for at

least 2 seconds.

2. Evacuate all occupants from the premises.

3. If flames and/or smoke are present, leave the premises and notify

your local Fire Department immediately.

4. If no flames or smoke are apparent, investigate the cause of the

alarm. The zone descriptor of the zone(s) in an alarm condition

will appear at the keypad.

Silencing A Fire Alarm

1. Silence the alarm by entering your code and pressing the

OFF

key. To clear the display, enter your code and press the

OFF

key

again

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 83 84

Keine Kommentare

ADEMCO VISTA-50PEN Betriebsanleitung Seite 62