ADEMCO VISTA-100 Bedienungsanleitung PDF herunterladen (Seite 15)

– 15 –

PROGRAMMING WITH #93 MENU MODE

NOTE: The following fields should be preset before beginning: 2*00 Number of Partitions;

1*32 receiver type. In addition, receivers should be programmed via Device programming.

After programming all system related programming fields in the usual way, press #93 while still in programming

mode to display the first choice of the menu driven programming functions. Press 0 (NO) or 1 (YES) in response to

the displayed menu selection. Pressing 0 will display the next choice in sequence. Menu selections are as follows:

ZONE PROG?

0=No 1=Yes

For programming the following:

• Zone Number

• Zone Response Type

• Hardwired zone

• RF Zone

• Right/left Loop Zone

• Serial number RPM zone

• Partition Number for Zone

• Dialer report code for zone

SERIAL PROG?

0=no 1=yes

For entering (learning) 5800 transmitter & serial number polling loop device serial

numbers into the system.

REPORT CODE PROG

0 = no; 1 = yes

For entering report codes for zones and all system conditions.

ALPHA PROG?

0=no 1=yes

For entering alpha descriptors for the following:

• Zone Descriptors

• Installer's Message

• Custom Words

• Partition Descriptors

• Relay Descriptors

DEVICE PROG?

0=no 1=yes

For defining the following device characteristics for addressable devices, including

consoles, RF receivers (4281/5881), 4285 voice module and 4204 output relay modules:

• Device Address

• Device Type

• Device's Home Partition

• Console Options

• Voice Module

RELAY PROG?

0=no 1=yes

For defining output relay functions.

RLY VOICE DESCR?

0=no 1=yes

For entering voice descriptors to be used with voice module functions.

CUSTOM INDEX #?

0=no 1=yes

For creating custom word substitutes for voice module annunciation.

#93 MENU MODE KEY COMMANDS

The following is a list of commands used while in the menu mode.

#93 Enters Menu mode

[✱] Serves as ENTER key. Press to have console accept entry.

[#] Backs up to previous screen.

0 Press to answer NO

1 Press to answer YES

01-09 All data entries are 2-digit entries.

00 Escapes from menu mode, back into field programming mode, when entered at the first question for

each category.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

ADEMCO VISTA-100 Bedienungsanleitung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme ADEMCO VISTA-100