ADEMCO 5130XM Bedienungsanleitung PDF herunterladen (Seite 8)

CHECKING FOR OPEN ZONES

BEFORE ARMING YOUR SYSTEM, ALL PROTECTED DOORS,

WINDOWS AND OTHER PROTECTION ZONES MUST BE CLOSED.

PROCEDURE

DISPLAYING ALL ZONE

1. If the Not Ready message is

displayed priorto arming, check

foropen zonesby depressing and

releasing the READY [*]key (do

not enter code first).

2. All open protection points will be

displayed. These points must be

either closed or bypassed before

the system can be armed. The

Ready messaget will be displayed

DESCRIPTORS

The Alpha Console can also display ~

the zone descriptors that a-

programmed in your system by

pressing the READY [*] key and

holding down for at least 5 seconds.

The abbreviated instructions for the

READY key will appear first, followed

by the descriptors programmed for

your

system.

Displaying all

descricdors is useful when vou need

when all protection zones have

to kn’ow the zone num6er of a

been either closed or bypassed.

particular zone, as when bypassing

zones.

t NOTE: All or part of this message

may be replaced by a customized

message programmed by the installer.

Bear this in mind whenever the

instructions for the Alpha Console

indicate that the “DISARMED” or

“READY” message will be displayed

-8-

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Keine Kommentare

ADEMCO 5130XM Bedienungsanleitung Seite 8