FINAL CHECK BEFORE TURNING THE
CONSOLE OVER TO THE USER
Before turning the Console over to the user, check all of the
following:
Wing to the Console is correct and complete.
The U-shaped jumper (back of Console) is properly placed for specific
system operating voltage.
Power to the Control/Communicator is applied.
The viewing angle adjustment is such that the user can read the
display easily.
The proper graphic label is placed over the Console keypad.
The proper control is selected using the “Device Selection” menu.
All protection point or zone descriptors are entered using the
“Descriptor Edit” menu.
Installers message (normal, ready-to-arm state message) is entered
using the “installer’s Message” menu, if desired.
Installer’s code is entered (preventing unauthorized use of
Programming Modes) using the “installer’s Code” menu, if desired.
Alpha Console is operating in NORMAL Mode (the Installer’s
message, or other system status message should be displayed).
Control/Communicator options have been programmed using the
programming procedures given in the Control/Communicator
Installation Instructions. Note that when using the Alpha Console to
program system options, the programming data entties will coniinue to
appear on the display until the display is filled. From then on the data
w(II scroll through the LCD display, with the new entr[es appearing as
the earlier entries disappear. This is unlike the
Control/Communicator’s standard Console, which displays only the
current data being entered. Note also that if the keys are pressed too
quickly while programming, false characters may be displayed, which
can lead to coniusion with regard to the data being programmed.
When all of the above has been performed, instruct the user in the Console’s
operation with regard to their specific secutity system. Be sure they understand
all key entry procedures and the use of their secutiiy code. Show them the
Console’s self-help display feature, which displays btief instructions for the use
of all the keypad mmmands. The self-help display appears when a command
key is held down for longer than five seconds.
The Alpha Console can now be turned over to the user.
11
(24 Seiten)
(173 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern