Ademco Vista-20SE/Vista-20HWSE General This system offers you three forms of protection: burglary, fire and emergency. Your system consists of at l
Arming Mode Exit Delay Entry Delay Perimeter Armed Interior Armed Away Yes Yes Yes Yes Stay Yes Yes Yes No Instant Yes No Yes No Maximum Yes No Yes Ye
Quick Bypass: 1. Enter security code then press bypass. Example: [7] [2] [9] [6] then press the BYPASS key. 2. In a few moments, all open zones will
A fire alarm sends a fire alarm message to the alarm monitoring company* and uniquely activates keypad and any external sounders (FIRE plus a zone num
Telco Fault (or CHECK and zone 94) If the telephone line monitor feature has been programmed for your system, this display indicates that the telephon
To Activate Devices Enter security code then press [#] + [7] + then enter the number representing the device you wish to activate. To Deactivate Devic
To Delete a User: 1. Enter master code then press CODE key. 2. Enter the two-digit User Number (03-16) for the user whose code you are deleting. 3.
2. Enter the security code then press test key. 3. Listen. The external sounder should sound for 2 seconds and then turn off. If the sounder does no
In addition, a battery-operated smoke detector with a low battery also emits a single "chirp" sound approximately once every 20–30 seconds,
Kommentare zu diesen Handbüchern