ADEMCO VISTA 10 Betriebsanweisung PDF herunterladen (Seite 15)

– 15 –

BYPASSING PROTECTION ZONES

Using the BYPASS 6 Key

LIMITATION:

The system will not allow fire zones to be bypassed.

Use

this key when you want to arm your system with one or more zones

intentionally unprotected. The system must be disarmed first.

1. Enter your security code and press the BYPASS key.

2. Enter the zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13,

etc.). Single-digit zone numbers must be preceded by a zero (e.g., 05, 06).

3. When finished, the keypad will momentarily display a "BYPASS" message

for each bypassed zone number. Wait for these zones to be displayed, to

confirm their bypass.

4. Arm the system as usual.

Bypassed zones are unprotected and will not cause an alarm if violated

while your system is armed.

All bypasses are removed when an OFF sequence (security code plus OFF) is

performed.

TYPICAL MOMENTARY DISPLAYS

OF BYPASSED ZONES



ALPHA



BYPASS

FIXED-WORD

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Keine Kommentare

ADEMCO VISTA 10 Betriebsanweisung Seite 15