ADEMCO VISTA-20SE Betriebsanweisung PDF herunterladen (Seite 31)

Vista 20SEa Training Guide Page 31

6.4 4285 Voice Interactive Phone Module

Training Module

• The VIP module will operate Partition 1 only

• Do not mount the 4285 inside the cabinet door above the control panel PCB.

• Connect 4285 Voice Interactive Phone module across the console bus.

• Connect the panel to the “C Com” jack on the 4285 line interface using the cable

supplied with the 4285.

• Take the cable previously used for the “mode 3” connection, and connect directly to

“Wall” jack on the 4285.

Enter Panel Programming

• Program Address “*28” for the required Voice Module access code.

- The first digit must be programmed within the range of 1-9

- The second digit must be a * (# + 11) or # (# + 12).

• Program Address “*95” to set the ring detection system.

- 1-14 = number rings

- 15=answering machine defeat.

• To access the VIP module, either dial up the system, using the number of rings

programmed in location *95 or pick up your touch tone phone and dial the pho ne code.

1 2 ... 26 27 28 29 30 31 32 33 34

Keine Kommentare

ADEMCO VISTA-20SE Betriebsanweisung Seite 31