ADEMCO 4111XM Bedienungsanleitung PDF herunterladen (Seite 4)

ADEMCO GROUP TECHNICAL SUPPORT KNOWLEDGEBASE

STEP -BY-STEP PROCEDURE

Created: 3.27.2000

Modified: 10.31.2001

File: V10se_23.Doc

Pages: 4

Page 4 of 4

27. The cursor should be flashing under the RC, enter the desired report code

(ex. If 31 enter 3 + 1).

NOTE: In the *58 expert mode you CANNOT enter Hexadecimal values for the

report code, you must use *56.

28. The cursor should be flashing under the IN, Enter the desired input type for this

zone. RF = Supervised RF (3), UR = Unsupervised RF (4), BR = Button Type

RF (5).

29. Press “*” to continue, screen displays “13 INPUT S/N L”

AXXX-XXXX 1

You can also press the “C” key to copy the previous zones serial number.

30. Enter the devices serial number or fault the device to enroll automatically.

31. Press “*” to continue, the cursor should now be flashing under the L. Enter the

devices loop number then press “*” to continue.

32. Screen Displays “XMIT TO CONFIRM PRESS * TO SKIP”. Fault the device

or press “*” to continue.

33. To program another zone repeat steps 25-32

15. To exit *58 expert mode press 00 when the cursor is flashing under the ZN,

screen displays “EXPERT MODE 58”

16. Press “*” + 99 to exit program mode.

1 2 3 4

Keine Kommentare

ADEMCO 4111XM Bedienungsanleitung Seite 4